Screen Innovations has incorporated adjustable (and defeatable) backlighting at the boarders of its zero-edge, fixed-frame projection screens. Just don’t call it Ambilight! Apart from this, however, I saw a stunning, bright, and colorful image (granted, the source was Speed Racer) on the 138-inch diagonal, 2.35:1, 1.4-gain Black Diamond screen, driven by a Sony VPL-VW1000 4K projector and a standard 2K Blu-ray disc.
OK, the wording should be One Adam 12, but if you know the reference you’ve been on the planet and watching TV for far too long. But Adam Audio GmbH, of Germany, was one of several manufacturers (including KEF, Totem, and Wharfedale) attempting to make music on the open show floor. The strikingly styled Tensor Gamma Mk2 shown here is the smallest model in Adam’s top of the line Tensor Mk2 Series.
At its Friday press event, SIM2 Multimedia featured its M.150 single chip DLP projector with LED illumination. Normally, LED-based projectors aren’t very bright, but this one lit up the screen. It might have helped that the 125-inch diagonal screen was a DNP Supernova with a gain of 2.4. Surprisingly, this screen had no perceptible hot spot and little fall off in brightness at off-axis angles, making it a viable alternative for LED-lit projectors like the M150.
SIM2 also launched, but did not demonstrate, its SIRIO high Brightness 3D projector (shown in the photo above). Its single-chip DLP dual lamp design (2 x 300W) is claimed to offer higher brightness than other dual lamp projectors. The projector body by itself is $25,000, and a variety of lenses are available at extra cost. The projector will go on sale in late October.
The company also announced a $1000 drop in price for its base line, single-chip DLP models. The Crystal 35 is now $5000, the Crystal 45, $7000.
A price was also announced for the Cinemaquattro 4K projector mentioned in an earlier blog: $158,000, not including lens, of which there will be a variety available. Just in case you were hovering on the edge of your seat before writing that check. The projector is based in a professional Christie design; the light output also mentioned earlier will depend on the chosen lamp configuration and lens.
Stewart Filmscreen has long been known for top quality projection screens, available in a blistering variety of screen materials. But they aren't exactly Blue Light specials. To attract more consumers to the benefits of a projection setup, Stewart has introduced a line of screens more affordable than its other offerings. Called the CIMA line, these screens will all be 16 x 9, fixed frame, and available in a range of standard sizes. Two materials will be available: grey with a gain of 0.9 and White with a gain of 1.1.
For those who have the spare cash, Stewart also demonstrated the latest version of its Director's Choice screen, offering an almost infinite variety of aspect ratios, settable and selectable by motorized masking at the touch of a button. The 15-foot wide model shown retails at just short of $60,000.
No price was announced for it today, but SIM2's Multimedia's Cinemaquattro must be that company's most pricey offering. Offering a full 4K resolution and a 3-chip DLP engine, it claims a brightness of up to 10,000 ANSI lumens from its 2kW Xenon lamp. As with all pro-derived projectors, its chassis is sold separately from its long list of available lenses. SIM2's PR maven, Lucette Nicoll, stands by to give you an idea of its size. It weighs 251 lbs.
Epson's long delayed LCOS (reflective LCD) projector caused quite a ruckus when it was demonstrated at the 2010 CEDIA. But it was never released and has now gone back to the drawing board. So don't look for it any time soon.
But there is a new Epson LCD in town, the PowerLite Pro Cinema 6020. The claim of 2400 lumens and a peak contrast ratio of 320,000:1 would, if realized, be industry highs. The refresh rate of 480Hz is said to increase the 3D brightness. At under $4000 when available in November, the projector will come with 2 pair of active 3D glasses, a spare lamp, and a guarantee of an exchange if, on delivery, there is even one dead pixel.
It seems that every screen maker these days is offering a 2.35:1, curved screen. The advantage to such a screen is its cinematic look. The disadvantages are possible geometry issues, cost, the fact that it can't be retracted, and possible audio concerns (a concave surface near your speakers isn't a plus). Elite joins the parade with its Lunette curved screens, available with several different screen materials, including a new woven acoustically transparent design (with an effective gain of under 0.9) and the company's 1.1 gain non-perf white.
The surprise here is the price structure. In a world where some curved screens command five-figure price tags, a 103-inch diagonal Lunette will set you back about $1500. Other sizes are available. Unfortunately, the woven, acoustically transparent screen will almost double that price. That's because while Elite screens are made in China, the woven material is available only in the U.S.
VEFXi is a new company (to us at least) with a plan to convert 2D to 3D on your 3D HDTV set. You say your set can already to this. as most can? But not quite like this, as VEFXi clearly demonstrated with its 3D-Bee Diamond ($699); It was the most convincing conversion I've yet seen, producing a a convincing illusion of 3D popping out of the set rather than existing mostly behind the screen's frame.
The company is also working on a glasses-free 3D solution, the 3D-Bee Ultimate, but the demo showed that this still needs work to produce an acceptable, artifact-free picture.
First impressions on the first day included the absence of some major players (Samsung, Panasonic, and apart from a small off-site event to launch its 4K, 84-inch HDTV, LG) leaving Sony the only heavy hitter in the flat panel business present. Many booths were smaller. Bowers&Wilkins/Classe/Rotel were hardly the only ones to downscale their square footage on the show floor-though in their case they have also set up shop at an off-site hotel.