Unit-to-unit sample variations, the viewing environment, and the source might render these settings less than optimum. We strongly recommend that you confirm the results on your sample by using a good display setup DVD to get as close as possible to an optimum picture short of a full color temperature (grayscale) and Color Management System calibration. The latter two are best left to a trained and properly equipped technician, such as those certified by the Imaging Science Foundation (ISF) or THX.

Picture Mode: Standard
OPC: Off
Backlight: -9
Contrast: +29
Brightness: -1
Color: -4
Tint: 0
Sharpness: -1

C.M.S.-Hue:

C.M.S.-Saturation:

Color Temp: Low

• Red Gain: 0 Green Gain: -6 Blue Gain: -7

I/P setting: Slow (where applicable)
Film Mode: On (where applicable)
Digital Noise Reduction: Off
Range of OPC: Default (Max +16, Min -16)

Article Continues: HT Labs Measures »

Company Info Sharp Electronics Corporation (201) 529-8200 www.sharpusa.com		Article Contents Page 1 Page 2 Features & Connections Settings HT Labs Measures