Yes! Been waiting for a review on these new speakers. Now I DEFINITELY want these speakers!
Pioneer SP-BS22-LR Speaker System HT Labs Measures
Satellite Sensitivity: 86 dB from 500 Hz to 2 kHz
Center Sensitivity: 88.5 dB from 500 Hz to 2 kHz
This graph shows the quasi-anechoic (employing close-miking of all woofers) frequency response of the SP-BS22-LR satellite (purple trace), SP-C22 center channel (green trace), and SW-8MK2 subwoofer (blue trace). All passive loudspeakers were measured with grilles at a distance of 1 meter with a 2.83-volt input and scaled for display purposes.
The SP-BS22-LR’s listening-window response (a five-point average of axial and +/–15-degree horizontal and vertical responses) measures +2.29/–3.18 decibels from 200 hertz to 10 kilohertz. The –3-dB point is at 63 Hz, and the –6-dB point is at 59 Hz. Impedance reaches a minimum of 5.50 ohms at 240 Hz and a phase angle of –44.48 degrees at 128 Hz.
The SP-C22’s listening-window response measures +1.36/–2.63 dB from 200 Hz to 10 kHz. An average of axial and +/–15-degree horizontal responses measures +1.05/–4.04 dB from 200 Hz to 10 kHz. The –3-dB point is at 75 Hz, and the –6-dB point is at 69 Hz. Impedance reaches a minimum of 6.00 ohms at 248 Hz and a phase angle of –43.30 degrees at 128 Hz.
The SW-8MK2’s close-miked response, normalized to the level at 80 Hz, indicates that the lower –3-dB point is at 31 Hz and the –6-dB point is at 29 Hz. The upper –3-dB point is at 137 Hz with the FREQ control set to maximum.—MJP
- Login or register to post comments


Almost there. For the 3rd generation just get rid of that fake wood grain and have rectangular grilles and they will sell a lot more.

Thanks for the review. I'm awaiting you review of the tower speakers. These pioneer are priced really well and if the towers measure and sound great, I maybe upgrading my Polk monitors to the Pioneer's.

I second the motion for a review of the system with the new towers in the front. I've been eyeing these speakers for quite some time now and would love a review of these including the towers.


As I checked this blog, this specs are reliable. I'm interested with speaker because my current speaker is not working and I don't know what's wrong with this. Hopefully I can purchase one of this item soon.-beaute pacifique
I want to say thank you for this blog because it gives me information about the specs and these are what I'm looking for.
Charlotte Book

The wire in a voice coil is usually made of copper, though aluminum—and, rarely, silver—may be used. www.zlotx.com The advantage of aluminum is its light weight, which raises the resonant frequency of the voice coil and allows it to respond more easily to higher frequencies.

To avoid being purchased pretend Chanel see or simply container, everyone oftentimes need to use past good judgment that will notice somewhere between actual and fake. Going Out Dresses

I really love their songs this guys are amazing. Can you post where their next tour. Vehicle leasing Company
| Displays Speakers | HT Systems Sources Electronics | Other Gear Software AV Interiors |
Top Picks
|
Community Show Reports |
Blogs
|
Shop Resources Subscriptions |


