Dynaudio DM 2/10 Speaker System HT Labs Measures
Sensitivity: 89.5 dB from 500 Hz to 2 kHz
This graph shows the quasi-anechoic (employing close-miking of all woofers) frequency response of the 2/10 (purple trace). The passive loudspeaker was measured with grille at a distance of 1 meter with a 2.83-volt input.
The 2/10’s listening-window response (a five-point average of axial and +/–15-degree horizontal and vertical responses) measures +1.26/–2.04 decibels from 200 hertz to 10 kilohertz. An average of axial and +/–15-degree horizontal responses measures +1.53/–2.83 dB from 200 Hz to 10 kHz. The –3-dB point is at 46 Hz, and the –6-dB point is at 36 Hz. Impedance reaches a minimum of 4.69 ohms at 3.3 kHz and a phase angle of –54.75 degrees at 76 Hz.—MJP
- Login or register to post comments
| Displays Speakers | HT Systems Sources Electronics | Other Gear Software AV Interiors |
Top Picks
|
Community Show Reports |
Blogs
|
Shop Resources Subscriptions |


